{
  "schemaVersion": "1.0",
  "item": {
    "slug": "bambu-lab-skill",
    "name": "Bambu Lab",
    "source": "tencent",
    "type": "skill",
    "category": "通讯协作",
    "sourceUrl": "https://clawhub.ai/photonixlaser-ux/bambu-lab-skill",
    "canonicalUrl": "https://clawhub.ai/photonixlaser-ux/bambu-lab-skill",
    "targetPlatform": "OpenClaw"
  },
  "install": {
    "downloadMode": "redirect",
    "downloadUrl": "/downloads/bambu-lab-skill",
    "sourceDownloadUrl": "https://wry-manatee-359.convex.site/api/v1/download?slug=bambu-lab-skill",
    "sourcePlatform": "tencent",
    "targetPlatform": "OpenClaw",
    "installMethod": "Manual import",
    "extraction": "Extract archive",
    "prerequisites": [
      "OpenClaw"
    ],
    "packageFormat": "ZIP package",
    "includedAssets": [
      "README.md",
      "SKILL.md",
      "references/mqtt.md",
      "scripts/bambu.py",
      "scripts/bambu.sh",
      "scripts/bambu_monitor.py"
    ],
    "primaryDoc": "SKILL.md",
    "quickSetup": [
      "Download the package from Yavira.",
      "Extract the archive and review SKILL.md first.",
      "Import or place the package into your OpenClaw setup."
    ],
    "agentAssist": {
      "summary": "Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.",
      "steps": [
        "Download the package from Yavira.",
        "Extract it into a folder your agent can access.",
        "Paste one of the prompts below and point your agent at the extracted folder."
      ],
      "prompts": [
        {
          "label": "New install",
          "body": "I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Then review README.md for any prerequisites, environment setup, or post-install checks. Tell me what you changed and call out any manual steps you could not complete."
        },
        {
          "label": "Upgrade existing",
          "body": "I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Then review README.md for any prerequisites, environment setup, or post-install checks. Summarize what changed and any follow-up checks I should run."
        }
      ]
    },
    "sourceHealth": {
      "source": "tencent",
      "status": "healthy",
      "reason": "direct_download_ok",
      "recommendedAction": "download",
      "checkedAt": "2026-04-23T16:43:11.935Z",
      "expiresAt": "2026-04-30T16:43:11.935Z",
      "httpStatus": 200,
      "finalUrl": "https://wry-manatee-359.convex.site/api/v1/download?slug=4claw-imageboard",
      "contentType": "application/zip",
      "probeMethod": "head",
      "details": {
        "probeUrl": "https://wry-manatee-359.convex.site/api/v1/download?slug=4claw-imageboard",
        "contentDisposition": "attachment; filename=\"4claw-imageboard-1.0.1.zip\"",
        "redirectLocation": null,
        "bodySnippet": null
      },
      "scope": "source",
      "summary": "Source download looks usable.",
      "detail": "Yavira can redirect you to the upstream package for this source.",
      "primaryActionLabel": "Download for OpenClaw",
      "primaryActionHref": "/downloads/bambu-lab-skill"
    },
    "validation": {
      "installChecklist": [
        "Use the Yavira download entry.",
        "Review SKILL.md after the package is downloaded.",
        "Confirm the extracted package contains the expected setup assets."
      ],
      "postInstallChecks": [
        "Confirm the extracted package includes the expected docs or setup files.",
        "Validate the skill or prompts are available in your target agent workspace.",
        "Capture any manual follow-up steps the agent could not complete."
      ]
    },
    "downloadPageUrl": "https://openagent3.xyz/downloads/bambu-lab-skill",
    "agentPageUrl": "https://openagent3.xyz/skills/bambu-lab-skill/agent",
    "manifestUrl": "https://openagent3.xyz/skills/bambu-lab-skill/agent.json",
    "briefUrl": "https://openagent3.xyz/skills/bambu-lab-skill/agent.md"
  },
  "agentAssist": {
    "summary": "Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.",
    "steps": [
      "Download the package from Yavira.",
      "Extract it into a folder your agent can access.",
      "Paste one of the prompts below and point your agent at the extracted folder."
    ],
    "prompts": [
      {
        "label": "New install",
        "body": "I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Then review README.md for any prerequisites, environment setup, or post-install checks. Tell me what you changed and call out any manual steps you could not complete."
      },
      {
        "label": "Upgrade existing",
        "body": "I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Then review README.md for any prerequisites, environment setup, or post-install checks. Summarize what changed and any follow-up checks I should run."
      }
    ]
  },
  "documentation": {
    "source": "clawhub",
    "primaryDoc": "SKILL.md",
    "sections": [
      {
        "title": "Bambu Lab 3D-Drucker Skill",
        "body": "Steuerung und Überwachung von Bambu Lab 3D-Druckern über MQTT im lokalen Netzwerk."
      },
      {
        "title": "Konfiguration",
        "body": "Standard-Konfiguration (anpassbar in scripts/bambu.sh):\n\nHost: 192.168.30.103 (A1 Drucker)\nPort: 8883 (MQTT über TLS)\nUsername: 03919A3A2200009 (Seriennummer)\nPasswort: 33576961 (Access Code)\nModel: A1"
      },
      {
        "title": "Verwendung",
        "body": "Nutze das Skript scripts/bambu.sh für alle Operationen:\n\n./skills/bambu-lab/scripts/bambu.sh <befehl>"
      },
      {
        "title": "Befehle",
        "body": "Status & Überwachung:\n\nstatus - Aktueller Druckstatus\nprogress - Druckfortschritt in %\ntemps - Temperaturen (Nozzle, Bed, Chamber)\nwatch - Live-Überwachung (läuft dauerhaft)\n\nSteuerung:\n\npause - Druck pausieren\nresume - Druck fortsetzen\nstop - Druck abbrechen\nlight on|off - Druckerlicht an/aus\nfans <0-255> - Lüftergeschwindigkeit\n\nBenachrichtigungen:\n\nnotify - Starte Überwachung mit Telegram-Benachrichtigung\n\nMQTT Debug:\n\nraw - Rohe MQTT-Nachrichten anzeigen"
      },
      {
        "title": "Beispiele",
        "body": "# Status abfragen\n./skills/bambu-lab/scripts/bambu.sh status\n\n# Druckfortschritt\n./skills/bambu-lab/scripts/bambu.sh progress\n\n# Live-Überwachung\n./skills/bambu-lab/scripts/bambu.sh watch\n\n# Druck pausieren\n./skills/bambu-lab/scripts/bambu.sh pause\n\n# Mit Benachrichtigung\n./skills/bambu-lab/scripts/bambu.sh notify"
      },
      {
        "title": "Automatische Benachrichtigungen",
        "body": "Für automatische Benachrichtigungen bei Druckende:\n\n# Im Hintergrund starten\n./skills/bambu-lab/scripts/bambu.sh notify &\n\nOder per Cron/Heartbeat regelmäßig ausführen."
      },
      {
        "title": "API Referenz",
        "body": "Siehe references/mqtt.md für vollständige MQTT-Dokumentation."
      },
      {
        "title": "Unterstützte Modelle",
        "body": "✅ A1 (getestet)\n✅ A1 Mini\n✅ P1P / P1S\n✅ X1 / X1C\n\nAlle Modelle nutzen das gleiche MQTT-Protokoll im LAN-Mode."
      }
    ],
    "body": "Bambu Lab 3D-Drucker Skill\n\nSteuerung und Überwachung von Bambu Lab 3D-Druckern über MQTT im lokalen Netzwerk.\n\nKonfiguration\n\nStandard-Konfiguration (anpassbar in scripts/bambu.sh):\n\nHost: 192.168.30.103 (A1 Drucker)\nPort: 8883 (MQTT über TLS)\nUsername: 03919A3A2200009 (Seriennummer)\nPasswort: 33576961 (Access Code)\nModel: A1\nVerwendung\n\nNutze das Skript scripts/bambu.sh für alle Operationen:\n\n./skills/bambu-lab/scripts/bambu.sh <befehl>\n\nBefehle\n\nStatus & Überwachung:\n\nstatus - Aktueller Druckstatus\nprogress - Druckfortschritt in %\ntemps - Temperaturen (Nozzle, Bed, Chamber)\nwatch - Live-Überwachung (läuft dauerhaft)\n\nSteuerung:\n\npause - Druck pausieren\nresume - Druck fortsetzen\nstop - Druck abbrechen\nlight on|off - Druckerlicht an/aus\nfans <0-255> - Lüftergeschwindigkeit\n\nBenachrichtigungen:\n\nnotify - Starte Überwachung mit Telegram-Benachrichtigung\n\nMQTT Debug:\n\nraw - Rohe MQTT-Nachrichten anzeigen\nBeispiele\n# Status abfragen\n./skills/bambu-lab/scripts/bambu.sh status\n\n# Druckfortschritt\n./skills/bambu-lab/scripts/bambu.sh progress\n\n# Live-Überwachung\n./skills/bambu-lab/scripts/bambu.sh watch\n\n# Druck pausieren\n./skills/bambu-lab/scripts/bambu.sh pause\n\n# Mit Benachrichtigung\n./skills/bambu-lab/scripts/bambu.sh notify\n\nAutomatische Benachrichtigungen\n\nFür automatische Benachrichtigungen bei Druckende:\n\n# Im Hintergrund starten\n./skills/bambu-lab/scripts/bambu.sh notify &\n\n\nOder per Cron/Heartbeat regelmäßig ausführen.\n\nAPI Referenz\n\nSiehe references/mqtt.md für vollständige MQTT-Dokumentation.\n\nUnterstützte Modelle\n✅ A1 (getestet)\n✅ A1 Mini\n✅ P1P / P1S\n✅ X1 / X1C\n\nAlle Modelle nutzen das gleiche MQTT-Protokoll im LAN-Mode."
  },
  "trust": {
    "sourceLabel": "tencent",
    "provenanceUrl": "https://clawhub.ai/photonixlaser-ux/bambu-lab-skill",
    "publisherUrl": "https://clawhub.ai/photonixlaser-ux/bambu-lab-skill",
    "owner": "photonixlaser-ux",
    "version": "0.1.0",
    "license": null,
    "verificationStatus": "Indexed source record"
  },
  "links": {
    "detailUrl": "https://openagent3.xyz/skills/bambu-lab-skill",
    "downloadUrl": "https://openagent3.xyz/downloads/bambu-lab-skill",
    "agentUrl": "https://openagent3.xyz/skills/bambu-lab-skill/agent",
    "manifestUrl": "https://openagent3.xyz/skills/bambu-lab-skill/agent.json",
    "briefUrl": "https://openagent3.xyz/skills/bambu-lab-skill/agent.md"
  }
}