Requirements
- Target platform
- OpenClaw
- Install method
- Manual import
- Extraction
- Extract archive
- Prerequisites
- OpenClaw
- Primary doc
- SKILL.md
Tencent SkillHub · Communication & Collaboration
Claw2claw Filetransfer
Cross-platform file transfer between OpenClaw agents via rsync over SSH. From Claws for Claws - send files uncomplicated without getting drizzled by hot butt...
skill openclawclawhub Free
Cross-platform file transfer between OpenClaw agents via rsync over SSH. From Claws for Claws - send files uncomplicated without getting drizzled by hot butt...
⬇ 0 downloads ★ 0 stars Unverified but indexed
Install for OpenClaw
Quick setup
- Download the package from Yavira.
- Extract the archive and review SKILL.md first.
- Import or place the package into your OpenClaw setup.
Package facts
- Download mode
- Yavira redirect
- Package format
- ZIP package
- Source platform
- Tencent SkillHub
- What's included
- SKILL.md, references/commands.md, references/examples.md
Validation
- Use the Yavira download entry.
- Review SKILL.md after the package is downloaded.
- Confirm the extracted package contains the expected setup assets.
Install with your agent
Agent handoff
Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.
- Download the package from Yavira.
- Extract it into a folder your agent can access.
- Paste one of the prompts below and point your agent at the extracted folder.
New install
I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Tell me what you changed and call out any manual steps you could not complete.
Upgrade existing
I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Summarize what changed and any follow-up checks I should run.
Trust & source
Release facts
- Source
- Tencent SkillHub
- Verification
- Indexed source record
- Version
- 1.0.0
Provenance
- Publisher
- Christopher-Schulze
- Source page
- View original listing
- Canonical URL
- Open canonical page
Documentation
claw2claw-filetransfer
File transfer so smooth, even a lobster can do it. 🦞 Send files between OpenClaw agents without the drama. rsync over SSH - delta transfers, compression, progress bars. Linux, macOS, Windows - we got you covered.
When to Trigger This Skill
Use this skill when user wants to: Transfer files between two OpenClaw agents Sync project directories bidirectionally Backup files to a remote agent Pull logs/data from remote agent Set up SSH connection between agents Move bits from A to B without crying
Quick Start
# 1. Set up remote agent (one-time) claw2claw setup 192.168.1.100 --user root # 2. Send files like a pro claw2claw send /backup.tar.gz # 3. Get files back claw2claw get /remote/logs.txt # 4. Sync entire directories claw2claw sync-to-remote ./my-project/
Commands
CommandDescriptionsetup <host>Configure remote agentsend <file>Upload to remoteget <file>Download from remotesync-to-remote <dir>Push directory to remotesync-from-remote <dir>Pull directory from remotels <path>List remote filesstatusShow connection status
Options
OptionDescription-n, --dry-runPreview without executing--compressEnable compression (default)--no-compressDisable compression--debugEnable debug output
Environment Variables
REMOTE_HOST="192.168.1.100" # Remote IP/hostname REMOTE_USER="root" # SSH user REMOTE_PORT="22" # SSH port SSH_KEY="/path/to/key" # Custom SSH key RSYNC_BWLIMIT=1000 # KB/s limit
Features
Delta transfers - Only sends changed bytes Compression - Gzip on the wire Progress bars - Watch it go brrr Bidirectional - Push or pull Cross-platform - Linux, macOS, Windows Key-based auth - No passwords
Use Cases
Backup server to local Sync code between agents Pull logs for analysis Deploy static sites Share datasets
Linux
# Pre-installed on most distros sudo apt install rsync
macOS
brew install rsync
Windows
# Option A: Git Bash (recommended) # Download from https://git-scm.com # Option B: cwrsync # Download from https://www.itefix.net/cwrsync # Option C: WSL wsl --install
Git Bash / MSYS2
Uses Unix-style paths: /c/Users/... rsync usually pre-installed Works out of the box
Windows Command Prompt / PowerShell
Use full paths or forward slashes: C:/Users/... Or use cwrsync
WSL
Detected as Linux, works perfectly Can communicate with Windows filesystem
Cygwin
Install via Cygwin setup Path: /cygdrive/c/Users/...
Compression
# On (default) - for text files claw2claw send /logs/*.log # Off - for already compressed files claw2claw send /backup.tar.gz --no-compress
Bandwidth
# Limit to 500 KB/s RSYNC_BWLIMIT=500 claw2claw send /huge-file.tar.gz
Large Files
# rsync auto-resumes interrupted transfers # Just run same command again claw2claw send /huge-file.tar.gz
Selective Sync
# Only sync specific patterns # Use --include and --exclude in rsync manually # Or sync specific subdirectories claw2claw sync-to-remote ./src/
Quick Test
claw2claw status
Manual SSH Test
ssh -o ConnectTimeout=5 user@host "echo OK"
Test File Transfer
# Small test file first echo "test" > /tmp/test.txt claw2claw send /tmp/test.txt /tmp/ claw2claw get /tmp/test.txt /tmp/ rm /tmp/test.txt
"rsync: command not found"
# Linux sudo apt install rsync # macOS brew install rsync # Windows # Install Git Bash or cwrsync
"Permission denied"
# Re-run setup to add SSH key claw2claw setup <host> --user <user>
"Connection timed out"
# Check host reachable ping <host> # Check port open nc -zv <host> 22
Daily Backup
claw2claw send /backups/daily-$(date +%Y%m%d).tar.gz /backups/
Project Sync
# Morning claw2claw sync-from-remote /workspace/project/ # Evening claw2claw sync-to-remote /workspace/project/
Log Collection
claw2claw get /var/log/syslog ./logs/
Security
SSH key-based auth only Keys: ~/.ssh/ (mode 700) Config: ~/.claw2claw.conf (mode 600) No passwords in scripts
Related Skills
Works well with: blogwatcher - Sync RSS feeds between agents github - Sync repositories after commits playwright-scraper-skill - Transfer scraped data Any skill that needs to share files
Uninstall
rm /usr/local/bin/claw2claw rm ~/.claw2claw.conf rm -rf ~/.claw2claw/ Made with 🦞🦞 From Claws for Claws. Transfer files uncomplicated.
Category context
Messaging, meetings, inboxes, CRM, and teammate communication surfaces.
Source: Tencent SkillHub
Largest current source with strong distribution and engagement signals.
Package contents
Included in package
3 Docs
- SKILL.md
- references/commands.md
- references/examples.md