{
  "schemaVersion": "1.0",
  "item": {
    "slug": "dht11-temp",
    "name": "Dht11 Temp",
    "source": "tencent",
    "type": "skill",
    "category": "开发工具",
    "sourceUrl": "https://clawhub.ai/NoahSeeger/dht11-temp",
    "canonicalUrl": "https://clawhub.ai/NoahSeeger/dht11-temp",
    "targetPlatform": "OpenClaw"
  },
  "install": {
    "downloadMode": "redirect",
    "downloadUrl": "/downloads/dht11-temp",
    "sourceDownloadUrl": "https://wry-manatee-359.convex.site/api/v1/download?slug=dht11-temp",
    "sourcePlatform": "tencent",
    "targetPlatform": "OpenClaw",
    "installMethod": "Manual import",
    "extraction": "Extract archive",
    "prerequisites": [
      "OpenClaw"
    ],
    "packageFormat": "ZIP package",
    "includedAssets": [
      "SKILL.md",
      "_meta.json",
      "scripts/main.py"
    ],
    "primaryDoc": "SKILL.md",
    "quickSetup": [
      "Download the package from Yavira.",
      "Extract the archive and review SKILL.md first.",
      "Import or place the package into your OpenClaw setup."
    ],
    "agentAssist": {
      "summary": "Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.",
      "steps": [
        "Download the package from Yavira.",
        "Extract it into a folder your agent can access.",
        "Paste one of the prompts below and point your agent at the extracted folder."
      ],
      "prompts": [
        {
          "label": "New install",
          "body": "I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Tell me what you changed and call out any manual steps you could not complete."
        },
        {
          "label": "Upgrade existing",
          "body": "I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Summarize what changed and any follow-up checks I should run."
        }
      ]
    },
    "sourceHealth": {
      "source": "tencent",
      "status": "healthy",
      "reason": "direct_download_ok",
      "recommendedAction": "download",
      "checkedAt": "2026-04-30T16:55:25.780Z",
      "expiresAt": "2026-05-07T16:55:25.780Z",
      "httpStatus": 200,
      "finalUrl": "https://wry-manatee-359.convex.site/api/v1/download?slug=network",
      "contentType": "application/zip",
      "probeMethod": "head",
      "details": {
        "probeUrl": "https://wry-manatee-359.convex.site/api/v1/download?slug=network",
        "contentDisposition": "attachment; filename=\"network-1.0.0.zip\"",
        "redirectLocation": null,
        "bodySnippet": null
      },
      "scope": "source",
      "summary": "Source download looks usable.",
      "detail": "Yavira can redirect you to the upstream package for this source.",
      "primaryActionLabel": "Download for OpenClaw",
      "primaryActionHref": "/downloads/dht11-temp"
    },
    "validation": {
      "installChecklist": [
        "Use the Yavira download entry.",
        "Review SKILL.md after the package is downloaded.",
        "Confirm the extracted package contains the expected setup assets."
      ],
      "postInstallChecks": [
        "Confirm the extracted package includes the expected docs or setup files.",
        "Validate the skill or prompts are available in your target agent workspace.",
        "Capture any manual follow-up steps the agent could not complete."
      ]
    },
    "downloadPageUrl": "https://openagent3.xyz/downloads/dht11-temp",
    "agentPageUrl": "https://openagent3.xyz/skills/dht11-temp/agent",
    "manifestUrl": "https://openagent3.xyz/skills/dht11-temp/agent.json",
    "briefUrl": "https://openagent3.xyz/skills/dht11-temp/agent.md"
  },
  "agentAssist": {
    "summary": "Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.",
    "steps": [
      "Download the package from Yavira.",
      "Extract it into a folder your agent can access.",
      "Paste one of the prompts below and point your agent at the extracted folder."
    ],
    "prompts": [
      {
        "label": "New install",
        "body": "I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Tell me what you changed and call out any manual steps you could not complete."
      },
      {
        "label": "Upgrade existing",
        "body": "I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Summarize what changed and any follow-up checks I should run."
      }
    ]
  },
  "documentation": {
    "source": "clawhub",
    "primaryDoc": "SKILL.md",
    "sections": [
      {
        "title": "DHT11 Temperature & Humidity Sensor",
        "body": "Read temperature and humidity from a DHT11 sensor."
      },
      {
        "title": "Hardware Setup",
        "body": "Wiring (adjust pin as needed):\n\nDHT11 Pinout:\n─────────────\n1. VCC     → 5V (Pin 2 oder 4)\n2. DATA    → GPIO <PIN> + 10K Pull-Up Widerstand → 5V\n3. GND     → GND (Pin 6)\n\nImportant: The 10K pull-up resistor must be connected between DATA and VCC (5V)!"
      },
      {
        "title": "Installation",
        "body": "# Install dependencies\npip3 install RPi.GPIO"
      },
      {
        "title": "Read Sensor (default pin 19)",
        "body": "sudo python3 scripts/dht/main.py"
      },
      {
        "title": "Read Sensor (custom pin)",
        "body": "sudo python3 scripts/dht/main.py 4     # Uses GPIO 4"
      },
      {
        "title": "Using Environment Variable",
        "body": "export DHT_PIN=4\nsudo python3 scripts/dht/main.py"
      },
      {
        "title": "Output",
        "body": "Line 1: Temperature (°C)\nLine 2: Humidity (%)"
      },
      {
        "title": "Customization",
        "body": "VariableDefaultDescriptionDHT_PIN19GPIO pin number"
      },
      {
        "title": "Example crontab entry",
        "body": "# Read every 30 minutes\n*/30 * * * * sudo python3 ~/scripts/dht/main.py >> /var/log/dht.log 2>&1"
      }
    ],
    "body": "DHT11 Temperature & Humidity Sensor\n\nRead temperature and humidity from a DHT11 sensor.\n\nHardware Setup\n\nWiring (adjust pin as needed):\n\nDHT11 Pinout:\n─────────────\n1. VCC     → 5V (Pin 2 oder 4)\n2. DATA    → GPIO <PIN> + 10K Pull-Up Widerstand → 5V\n3. GND     → GND (Pin 6)\n\n\nImportant: The 10K pull-up resistor must be connected between DATA and VCC (5V)!\n\nInstallation\n# Install dependencies\npip3 install RPi.GPIO\n\nUsage\nRead Sensor (default pin 19)\nsudo python3 scripts/dht/main.py\n\nRead Sensor (custom pin)\nsudo python3 scripts/dht/main.py 4     # Uses GPIO 4\n\nUsing Environment Variable\nexport DHT_PIN=4\nsudo python3 scripts/dht/main.py\n\nOutput\nLine 1: Temperature (°C)\nLine 2: Humidity (%)\nCustomization\nVariable\tDefault\tDescription\nDHT_PIN\t19\tGPIO pin number\nExample crontab entry\n# Read every 30 minutes\n*/30 * * * * sudo python3 ~/scripts/dht/main.py >> /var/log/dht.log 2>&1"
  },
  "trust": {
    "sourceLabel": "tencent",
    "provenanceUrl": "https://clawhub.ai/NoahSeeger/dht11-temp",
    "publisherUrl": "https://clawhub.ai/NoahSeeger/dht11-temp",
    "owner": "NoahSeeger",
    "version": "1.0.0",
    "license": null,
    "verificationStatus": "Indexed source record"
  },
  "links": {
    "detailUrl": "https://openagent3.xyz/skills/dht11-temp",
    "downloadUrl": "https://openagent3.xyz/downloads/dht11-temp",
    "agentUrl": "https://openagent3.xyz/skills/dht11-temp/agent",
    "manifestUrl": "https://openagent3.xyz/skills/dht11-temp/agent.json",
    "briefUrl": "https://openagent3.xyz/skills/dht11-temp/agent.md"
  }
}