# Send Dht11 Temp to your agent
Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.
## Fast path
- Download the package from Yavira.
- Extract it into a folder your agent can access.
- Paste one of the prompts below and point your agent at the extracted folder.
## Suggested prompts
### New install

```text
I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Tell me what you changed and call out any manual steps you could not complete.
```
### Upgrade existing

```text
I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Summarize what changed and any follow-up checks I should run.
```
## Machine-readable fields
```json
{
  "schemaVersion": "1.0",
  "item": {
    "slug": "dht11-temp",
    "name": "Dht11 Temp",
    "source": "tencent",
    "type": "skill",
    "category": "开发工具",
    "sourceUrl": "https://clawhub.ai/NoahSeeger/dht11-temp",
    "canonicalUrl": "https://clawhub.ai/NoahSeeger/dht11-temp",
    "targetPlatform": "OpenClaw"
  },
  "install": {
    "downloadUrl": "/downloads/dht11-temp",
    "sourceDownloadUrl": "https://wry-manatee-359.convex.site/api/v1/download?slug=dht11-temp",
    "sourcePlatform": "tencent",
    "targetPlatform": "OpenClaw",
    "packageFormat": "ZIP package",
    "primaryDoc": "SKILL.md",
    "includedAssets": [
      "SKILL.md",
      "_meta.json",
      "scripts/main.py"
    ],
    "downloadMode": "redirect",
    "sourceHealth": {
      "source": "tencent",
      "slug": "dht11-temp",
      "status": "healthy",
      "reason": "direct_download_ok",
      "recommendedAction": "download",
      "checkedAt": "2026-05-02T13:17:49.430Z",
      "expiresAt": "2026-05-09T13:17:49.430Z",
      "httpStatus": 200,
      "finalUrl": "https://wry-manatee-359.convex.site/api/v1/download?slug=dht11-temp",
      "contentType": "application/zip",
      "probeMethod": "head",
      "details": {
        "probeUrl": "https://wry-manatee-359.convex.site/api/v1/download?slug=dht11-temp",
        "contentDisposition": "attachment; filename=\"dht11-temp-1.0.0.zip\"",
        "redirectLocation": null,
        "bodySnippet": null,
        "slug": "dht11-temp"
      },
      "scope": "item",
      "summary": "Item download looks usable.",
      "detail": "Yavira can redirect you to the upstream package for this item.",
      "primaryActionLabel": "Download for OpenClaw",
      "primaryActionHref": "/downloads/dht11-temp"
    },
    "validation": {
      "installChecklist": [
        "Use the Yavira download entry.",
        "Review SKILL.md after the package is downloaded.",
        "Confirm the extracted package contains the expected setup assets."
      ],
      "postInstallChecks": [
        "Confirm the extracted package includes the expected docs or setup files.",
        "Validate the skill or prompts are available in your target agent workspace.",
        "Capture any manual follow-up steps the agent could not complete."
      ]
    }
  },
  "links": {
    "detailUrl": "https://openagent3.xyz/skills/dht11-temp",
    "downloadUrl": "https://openagent3.xyz/downloads/dht11-temp",
    "agentUrl": "https://openagent3.xyz/skills/dht11-temp/agent",
    "manifestUrl": "https://openagent3.xyz/skills/dht11-temp/agent.json",
    "briefUrl": "https://openagent3.xyz/skills/dht11-temp/agent.md"
  }
}
```
## Documentation

### DHT11 Temperature & Humidity Sensor

Read temperature and humidity from a DHT11 sensor.

### Hardware Setup

Wiring (adjust pin as needed):

DHT11 Pinout:
─────────────
1. VCC     → 5V (Pin 2 oder 4)
2. DATA    → GPIO <PIN> + 10K Pull-Up Widerstand → 5V
3. GND     → GND (Pin 6)

Important: The 10K pull-up resistor must be connected between DATA and VCC (5V)!

### Installation

# Install dependencies
pip3 install RPi.GPIO

### Read Sensor (default pin 19)

sudo python3 scripts/dht/main.py

### Read Sensor (custom pin)

sudo python3 scripts/dht/main.py 4     # Uses GPIO 4

### Using Environment Variable

export DHT_PIN=4
sudo python3 scripts/dht/main.py

### Output

Line 1: Temperature (°C)
Line 2: Humidity (%)

### Customization

VariableDefaultDescriptionDHT_PIN19GPIO pin number

### Example crontab entry

# Read every 30 minutes
*/30 * * * * sudo python3 ~/scripts/dht/main.py >> /var/log/dht.log 2>&1
## Trust
- Source: tencent
- Verification: Indexed source record
- Publisher: NoahSeeger
- Version: 1.0.0
## Source health
- Status: healthy
- Item download looks usable.
- Yavira can redirect you to the upstream package for this item.
- Health scope: item
- Reason: direct_download_ok
- Checked at: 2026-05-02T13:17:49.430Z
- Expires at: 2026-05-09T13:17:49.430Z
- Recommended action: Download for OpenClaw
## Links
- [Detail page](https://openagent3.xyz/skills/dht11-temp)
- [Send to Agent page](https://openagent3.xyz/skills/dht11-temp/agent)
- [JSON manifest](https://openagent3.xyz/skills/dht11-temp/agent.json)
- [Markdown brief](https://openagent3.xyz/skills/dht11-temp/agent.md)
- [Download page](https://openagent3.xyz/downloads/dht11-temp)