Requirements
- Target platform
- OpenClaw
- Install method
- Manual import
- Extraction
- Extract archive
- Prerequisites
- OpenClaw
- Primary doc
- SKILL.md
Tencent SkillHub · Communication & Collaboration
Ipcam
Control ONVIF Profile S/T IP cameras for PTZ, presets, discovery, and RTSP snapshot/recording with auto-discovery and multi-camera support.
skill openclawclawhub Free
Control ONVIF Profile S/T IP cameras for PTZ, presets, discovery, and RTSP snapshot/recording with auto-discovery and multi-camera support.
⬇ 0 downloads ★ 0 stars Unverified but indexed
Install for OpenClaw
Quick setup
- Download the package from Yavira.
- Extract the archive and review SKILL.md first.
- Import or place the package into your OpenClaw setup.
Package facts
- Download mode
- Yavira redirect
- Package format
- ZIP package
- Source platform
- Tencent SkillHub
- What's included
- CHANGELOG.md, README.md, SKILL.md, install.sh, scripts/camera.sh, scripts/ptz.py
Validation
- Use the Yavira download entry.
- Review SKILL.md after the package is downloaded.
- Confirm the extracted package contains the expected setup assets.
Install with your agent
Agent handoff
Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.
- Download the package from Yavira.
- Extract it into a folder your agent can access.
- Paste one of the prompts below and point your agent at the extracted folder.
New install
I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Then review README.md for any prerequisites, environment setup, or post-install checks. Tell me what you changed and call out any manual steps you could not complete.
Upgrade existing
I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Then review README.md for any prerequisites, environment setup, or post-install checks. Summarize what changed and any follow-up checks I should run.
Trust & source
Release facts
- Source
- Tencent SkillHub
- Verification
- Indexed source record
- Version
- 1.0.0
Provenance
- Publisher
- ltpop
- Source page
- View original listing
- Canonical URL
- Open canonical page
Documentation
IP Camera Skill
Control IP cameras via RTSP (snapshots, recording) and ONVIF (PTZ, presets, discovery). Tested with TP-Link Tapo/Vigi. Works with Hikvision, Dahua, Reolink, Amcrest, Axis, and other ONVIF Profile S/T cameras.
Setup
bash skills/ipcam/install.sh Then either discover cameras automatically or configure manually: # Auto-discover and add ptz.py discover --add # Or edit config nano ~/.config/ipcam/config.json
Config Format
{ "default": "front-door", "cameras": { "front-door": { "ip": "192.168.1.100", "username": "admin", "password": "secret", "rtsp_port": 554, "onvif_port": 2020, "rtsp_main_path": "stream1", "rtsp_sub_path": "stream2" } } } onvif_port: 2020 (TP-Link), 80 (Hikvision/Dahua), 8000, 8080 rtsp_main_path / rtsp_sub_path: auto-detect with ptz.py stream-uri --save Env overrides: CAM_IP, CAM_USER, CAM_PASS, CAM_RTSP_PORT, CAM_ONVIF_PORT
RTSP (camera.sh)
camera.sh snapshot # capture frame camera.sh --cam cam2 snapshot /tmp/cam.jpg # specific camera camera.sh record 15 # record 15s clip camera.sh stream-url sub # print sub-stream URL camera.sh info # test connectivity camera.sh list-cameras # list configured cameras
PTZ (ptz.py)
ptz.py status # current position ptz.py move left # pan left (speed 0.5, 0.5s) ptz.py move zoomin 0.8 1.0 # zoom in, speed 0.8, 1s ptz.py goto 0.5 -0.2 0.0 # absolute pan/tilt/zoom ptz.py home # home position ptz.py stop # stop movement ptz.py preset list # list presets ptz.py preset goto 1 # go to preset 1 ptz.py preset set 2 "Door" # save current pos as preset
Discovery & Stream URI
ptz.py discover # scan network for ONVIF cameras ptz.py discover --add # scan and add to config ptz.py stream-uri # query RTSP paths from ONVIF ptz.py stream-uri --save # save paths to config Multi-camera: use --cam <name> with any command.
Directions
left, right, up, down, zoomin, zoomout, upleft, upright, downleft, downright
Troubleshooting
RTSP fails: Check IP/port/firewall. Use ptz.py stream-uri to verify paths. Camera may limit concurrent RTSP connections (try closing other viewers). ONVIF fails: Verify ONVIF port and that ONVIF is enabled in camera web UI. Try common ports: 2020, 80, 8000, 8080. No cameras found: Ensure same subnet, ONVIF enabled, UDP multicast not blocked. PTZ not working: Not all cameras support PTZ. Check ONVIF Profile S support. Auth error: Check username/password. Special characters are URL-encoded automatically.
Category context
Messaging, meetings, inboxes, CRM, and teammate communication surfaces.
Source: Tencent SkillHub
Largest current source with strong distribution and engagement signals.
Package contents
Included in package
3 Docs3 Scripts
- SKILL.md
- CHANGELOG.md
- README.md
- install.sh
- scripts/camera.sh
- scripts/ptz.py