Requirements
- Target platform
- OpenClaw
- Install method
- Manual import
- Extraction
- Extract archive
- Prerequisites
- OpenClaw
- Primary doc
- SKILL.md
Tencent SkillHub · Developer Tools
IPFS Server
Full IPFS node operations — install, configure, pin content, publish IPNS, manage peers, and run gateway services
skill openclawclawhub Free
Full IPFS node operations — install, configure, pin content, publish IPNS, manage peers, and run gateway services
⬇ 0 downloads ★ 0 stars Unverified but indexed
Install for OpenClaw
Quick setup
- Download the package from Yavira.
- Extract the archive and review SKILL.md first.
- Import or place the package into your OpenClaw setup.
Package facts
- Download mode
- Yavira redirect
- Package format
- ZIP package
- Source platform
- Tencent SkillHub
- What's included
- README.md, SKILL.md
Validation
- Use the Yavira download entry.
- Review SKILL.md after the package is downloaded.
- Confirm the extracted package contains the expected setup assets.
Install with your agent
Agent handoff
Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.
- Download the package from Yavira.
- Extract it into a folder your agent can access.
- Paste one of the prompts below and point your agent at the extracted folder.
New install
I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Then review README.md for any prerequisites, environment setup, or post-install checks. Tell me what you changed and call out any manual steps you could not complete.
Upgrade existing
I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Then review README.md for any prerequisites, environment setup, or post-install checks. Summarize what changed and any follow-up checks I should run.
Trust & source
Release facts
- Source
- Tencent SkillHub
- Verification
- Indexed source record
- Version
- 0.1.0
Provenance
- Publisher
- apexfork
- Source page
- View original listing
- Canonical URL
- Open canonical page
Documentation
IPFS Server Operations
You are an IPFS server administrator. You help users run IPFS nodes, manage content, publish data, and operate gateway services. This skill handles full node operations including content publishing and network configuration. For read-only IPFS queries and content exploration, use the ipfs-client skill.
Installation (macOS)
# Homebrew (recommended) brew install ipfs # Or download binary from dist.ipfs.tech curl -O https://dist.ipfs.tech/kubo/v0.24.0/kubo_v0.24.0_darwin-amd64.tar.gz tar -xzf kubo_v0.24.0_darwin-amd64.tar.gz sudo ./kubo/install.sh
Node Initialization
First-time setup: # Initialize repository ipfs init # Show peer ID ipfs id # Configure for low-resource usage (optional) ipfs config profile apply lowpower Basic configuration: # Allow gateway on all interfaces (for local network access) ipfs config Addresses.Gateway /ip4/0.0.0.0/tcp/8080 # Configure API (keep localhost for security) ipfs config Addresses.API /ip4/127.0.0.1/tcp/5001 # Set storage limit ipfs config Datastore.StorageMax 10GB
Starting and Stopping
Start IPFS daemon: ipfs daemon &> ipfs.log 2>&1 & Check daemon status: ipfs swarm peers | wc -l # Connected peer count ipfs repo stat # Repository statistics Stop daemon: pkill ipfs
Adding Content
Add files and directories: # Add single file ipfs add myfile.txt # Returns: added QmHash myfile.txt # Add directory recursively ipfs add -r ./my-directory/ # Add and only show final hash ipfs add -Q myfile.txt # Add with custom name ipfs add --wrap-with-directory myfile.txt Add from stdin: echo "Hello IPFS" | ipfs add cat largefile.json | ipfs add --pin=false # Don't pin immediately
Pinning Management
Pin content (prevent garbage collection): ipfs pin add QmHash ipfs pin add -r QmHash # Recursively pin directory # List pinned content ipfs pin ls --type=recursive ipfs pin ls --type=direct # Unpin content ipfs pin rm QmHash Remote pinning services: # Configure remote pinning (Pinata, Web3.Storage, etc.) ipfs pin remote service add pinata https://api.pinata.cloud/psa YOUR_JWT # Pin to remote service ipfs pin remote add --service=pinata --name="my-content" QmHash # List remote pins ipfs pin remote ls --service=pinata
Garbage Collection
Clean up unpinned content: # Show what would be collected ipfs repo gc --dry-run # Run garbage collection ipfs repo gc # Check repo size before/after ipfs repo stat
IPNS Publishing
Publish content to IPNS: # Publish to default key ipfs name publish QmHash # Create and use custom key ipfs key gen --type=ed25519 my-site ipfs name publish --key=my-site QmHash # List published records ipfs name pubsub subs IPNS with custom domains: # Create DNS TXT record: _dnslink.example.com = "dnslink=/ipns/k51qzi5uqu5d..." # Then resolve via: ipfs name resolve /ipns/example.com
Content Updates
Update IPNS record: # Publish new version ipfs add -r ./updated-site/ ipfs name publish --key=my-site QmNewHash
Swarm Management
Peer operations: # List connected peers ipfs swarm peers # Connect to specific peer ipfs swarm connect /ip4/104.131.131.82/tcp/4001/p2p/QmPeerID # Disconnect peer ipfs swarm disconnect /ip4/104.131.131.82/tcp/4001/p2p/QmPeerID Address configuration: # Show current addresses ipfs config Addresses # Add custom swarm address ipfs config --json Addresses.Swarm '["/ip4/0.0.0.0/tcp/4001", "/ip6/::/tcp/4001"]'
Bootstrap Nodes
Manage bootstrap peers: # List bootstrap nodes ipfs bootstrap list # Add custom bootstrap node ipfs bootstrap add /ip4/104.131.131.82/tcp/4001/p2p/QmBootstrapPeer # Remove all bootstrap nodes (private network) ipfs bootstrap rm --all
Local Gateway
Configure gateway: # Basic gateway configuration ipfs config Addresses.Gateway /ip4/127.0.0.1/tcp/8080 # Public gateway (be careful!) ipfs config Addresses.Gateway /ip4/0.0.0.0/tcp/8080 # Enable directory listing ipfs config --json Gateway.PublicGateways '{ "localhost": { "Paths": ["/ipfs", "/ipns"], "UseSubdomains": false } }' Access patterns: # Via path http://localhost:8080/ipfs/QmHash # Via subdomain (if configured) http://QmHash.ipfs.localhost:8080
Reverse Proxy Setup
Nginx configuration example: server { listen 80; server_name gateway.example.com; location / { proxy_pass http://127.0.0.1:8080; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; } }
Performance Tuning
High-performance settings: # Apply server profile ipfs config profile apply server # Increase connection limits ipfs config Swarm.ConnMgr.HighWater 2000 ipfs config Swarm.ConnMgr.LowWater 1000 # Adjust bitswap settings ipfs config --json Bitswap.MaxOutstandingBytesPerPeer 1048576
Private Networks
Create private IPFS network: # Generate swarm key echo -e "/key/swarm/psk/1.0.0/\n/base16/\n$(tr -dc 'a-f0-9' < /dev/urandom | head -c64)" > ~/.ipfs/swarm.key # ⚠️ SECURITY: This swarm key is your network's access control credential. # Anyone with this file can join your private network. Protect it accordingly. # Remove all bootstrap nodes ipfs bootstrap rm --all # Start daemon (will only connect to nodes with same key) ipfs daemon
Storage Configuration
Configure datastore: # Set storage limits ipfs config Datastore.StorageMax 100GB ipfs config Datastore.GCPeriod "1h" # Enable flatfs for better performance ipfs config --json Datastore.Spec '{ "mounts": [ { "child": {"type": "flatfs", "path": "blocks", "shardFunc": "/repo/flatfs/shard/v1/next-to-last/2"}, "mountpoint": "/blocks", "prefix": "flatfs.datastore", "type": "mount" } ], "type": "mount" }'
Health Checks
Basic health monitoring: # Check daemon status ipfs stats bw # Bandwidth usage ipfs stats repo # Repository stats ipfs diag sys # System information ipfs log level debug # Enable debug logging Connection monitoring: # Monitor peer connections while true; do echo "$(date): $(ipfs swarm peers | wc -l) peers" sleep 60 done
Log Management
Configure logging: # Set log levels ipfs log level bitswap info ipfs log level dht warn # Tail logs ipfs log tail
Security Considerations
API access: Keep API on localhost (127.0.0.1:5001) unless in trusted network Use firewall rules to restrict API access Consider authentication proxy for multi-user setups Gateway security: Public gateways can consume significant bandwidth Implement rate limiting and caching Monitor for abuse and unauthorized content Content policy: IPFS is censorship-resistant - content removal is complex Implement content filtering at gateway level if needed Consider legal implications of operating public infrastructure
Troubleshooting
Connection issues: Check firewall allows ports 4001 (swarm) and 8080 (gateway) Verify bootstrap nodes are reachable Try different swarm addresses Performance problems: Run garbage collection: ipfs repo gc Check available disk space and datastore limits Monitor bandwidth usage: ipfs stats bw Consider applying performance profiles Content not accessible: Verify content is pinned: ipfs pin ls Check if providers exist: ipfs dht findprovs QmHash Try republishing IPNS records Related skills: /ipfs-client (read-only queries), /eth-readonly (blockchain integration)
Category context
Code helpers, APIs, CLIs, browser automation, testing, and developer operations.
Source: Tencent SkillHub
Largest current source with strong distribution and engagement signals.
Package contents
Included in package
2 Docs
- SKILL.md
- README.md