{ "schemaVersion": "1.0", "item": { "slug": "nanoleaf", "name": "Nanoleaf (Picoleaf)", "source": "tencent", "type": "skill", "category": "开发工具", "sourceUrl": "https://clawhub.ai/rstierli/nanoleaf", "canonicalUrl": "https://clawhub.ai/rstierli/nanoleaf", "targetPlatform": "OpenClaw" }, "install": { "downloadMode": "redirect", "downloadUrl": "/downloads/nanoleaf", "sourceDownloadUrl": "https://wry-manatee-359.convex.site/api/v1/download?slug=nanoleaf", "sourcePlatform": "tencent", "targetPlatform": "OpenClaw", "installMethod": "Manual import", "extraction": "Extract archive", "prerequisites": [ "OpenClaw" ], "packageFormat": "ZIP package", "includedAssets": [ "SKILL.md" ], "primaryDoc": "SKILL.md", "quickSetup": [ "Download the package from Yavira.", "Extract the archive and review SKILL.md first.", "Import or place the package into your OpenClaw setup." ], "agentAssist": { "summary": "Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.", "steps": [ "Download the package from Yavira.", "Extract it into a folder your agent can access.", "Paste one of the prompts below and point your agent at the extracted folder." ], "prompts": [ { "label": "New install", "body": "I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Tell me what you changed and call out any manual steps you could not complete." }, { "label": "Upgrade existing", "body": "I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Summarize what changed and any follow-up checks I should run." } ] }, "sourceHealth": { "source": "tencent", "status": "healthy", "reason": "direct_download_ok", "recommendedAction": "download", "checkedAt": "2026-04-30T16:55:25.780Z", "expiresAt": "2026-05-07T16:55:25.780Z", "httpStatus": 200, "finalUrl": "https://wry-manatee-359.convex.site/api/v1/download?slug=network", "contentType": "application/zip", "probeMethod": "head", "details": { "probeUrl": "https://wry-manatee-359.convex.site/api/v1/download?slug=network", "contentDisposition": "attachment; filename=\"network-1.0.0.zip\"", "redirectLocation": null, "bodySnippet": null }, "scope": "source", "summary": "Source download looks usable.", "detail": "Yavira can redirect you to the upstream package for this source.", "primaryActionLabel": "Download for OpenClaw", "primaryActionHref": "/downloads/nanoleaf" }, "validation": { "installChecklist": [ "Use the Yavira download entry.", "Review SKILL.md after the package is downloaded.", "Confirm the extracted package contains the expected setup assets." ], "postInstallChecks": [ "Confirm the extracted package includes the expected docs or setup files.", "Validate the skill or prompts are available in your target agent workspace.", "Capture any manual follow-up steps the agent could not complete." ] }, "downloadPageUrl": "https://openagent3.xyz/downloads/nanoleaf", "agentPageUrl": "https://openagent3.xyz/skills/nanoleaf/agent", "manifestUrl": "https://openagent3.xyz/skills/nanoleaf/agent.json", "briefUrl": "https://openagent3.xyz/skills/nanoleaf/agent.md" }, "agentAssist": { "summary": "Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.", "steps": [ "Download the package from Yavira.", "Extract it into a folder your agent can access.", "Paste one of the prompts below and point your agent at the extracted folder." ], "prompts": [ { "label": "New install", "body": "I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Tell me what you changed and call out any manual steps you could not complete." }, { "label": "Upgrade existing", "body": "I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Summarize what changed and any follow-up checks I should run." } ] }, "documentation": { "source": "clawhub", "primaryDoc": "SKILL.md", "sections": [ { "title": "Picoleaf CLI", "body": "Use picoleaf to control Nanoleaf light panels.\n\nSetup\n\nFind Nanoleaf IP: Check router or use mDNS: dns-sd -Z _nanoleafapi\nGenerate token: Hold power button 5-7 sec until LED flashes, then within 30 sec run:\ncurl -iLX POST http://:16021/api/v1/new\nCreate config file ~/.picoleafrc:\nhost=:16021\naccess_token=\n\nPower\n\npicoleaf on - Turn on\npicoleaf off - Turn off\n\nBrightness\n\npicoleaf brightness <0-100> - Set brightness percentage\n\nColors\n\npicoleaf rgb - Set RGB color (0-255 each)\npicoleaf hsl - Set HSL color\npicoleaf temp <1200-6500> - Set color temperature in Kelvin\n\nExamples\n\nWarm dim light: picoleaf on && picoleaf brightness 30 && picoleaf temp 2700\nBright blue: picoleaf on && picoleaf brightness 100 && picoleaf rgb 0 100 255\nTurn off: picoleaf off\n\nNotes\n\nDefault port is 16021\nToken generation requires physical access to the Nanoleaf controller\nMultiple commands can be chained with &&" } ], "body": "Picoleaf CLI\n\nUse picoleaf to control Nanoleaf light panels.\n\nSetup\n\nFind Nanoleaf IP: Check router or use mDNS: dns-sd -Z _nanoleafapi\nGenerate token: Hold power button 5-7 sec until LED flashes, then within 30 sec run: curl -iLX POST http://:16021/api/v1/new\nCreate config file ~/.picoleafrc:\nhost=:16021\naccess_token=\n\n\nPower\n\npicoleaf on - Turn on\npicoleaf off - Turn off\n\nBrightness\n\npicoleaf brightness <0-100> - Set brightness percentage\n\nColors\n\npicoleaf rgb - Set RGB color (0-255 each)\npicoleaf hsl - Set HSL color\npicoleaf temp <1200-6500> - Set color temperature in Kelvin\n\nExamples\n\nWarm dim light: picoleaf on && picoleaf brightness 30 && picoleaf temp 2700\nBright blue: picoleaf on && picoleaf brightness 100 && picoleaf rgb 0 100 255\nTurn off: picoleaf off\n\nNotes\n\nDefault port is 16021\nToken generation requires physical access to the Nanoleaf controller\nMultiple commands can be chained with &&" }, "trust": { "sourceLabel": "tencent", "provenanceUrl": "https://clawhub.ai/rstierli/nanoleaf", "publisherUrl": "https://clawhub.ai/rstierli/nanoleaf", "owner": "rstierli", "version": "1.0.0", "license": null, "verificationStatus": "Indexed source record" }, "links": { "detailUrl": "https://openagent3.xyz/skills/nanoleaf", "downloadUrl": "https://openagent3.xyz/downloads/nanoleaf", "agentUrl": "https://openagent3.xyz/skills/nanoleaf/agent", "manifestUrl": "https://openagent3.xyz/skills/nanoleaf/agent.json", "briefUrl": "https://openagent3.xyz/skills/nanoleaf/agent.md" } }