Requirements
- Target platform
- OpenClaw
- Install method
- Manual import
- Extraction
- Extract archive
- Prerequisites
- OpenClaw
- Primary doc
- SKILL.md
Tencent SkillHub · Communication & Collaboration
Netatmo
Control Netatmo thermostat and read weather station data. Use for heating control (set temperature, change mode), checking indoor/outdoor temperatures, CO₂ levels, humidity, noise, and pressure readings.
skill openclawclawhub Free
Control Netatmo thermostat and read weather station data. Use for heating control (set temperature, change mode), checking indoor/outdoor temperatures, CO₂ levels, humidity, noise, and pressure readings.
⬇ 0 downloads ★ 0 stars Unverified but indexed
Install for OpenClaw
Quick setup
- Download the package from Yavira.
- Extract the archive and review SKILL.md first.
- Import or place the package into your OpenClaw setup.
Package facts
- Download mode
- Yavira redirect
- Package format
- ZIP package
- Source platform
- Tencent SkillHub
- What's included
- SKILL.md
Validation
- Use the Yavira download entry.
- Review SKILL.md after the package is downloaded.
- Confirm the extracted package contains the expected setup assets.
Install with your agent
Agent handoff
Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.
- Download the package from Yavira.
- Extract it into a folder your agent can access.
- Paste one of the prompts below and point your agent at the extracted folder.
New install
I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Tell me what you changed and call out any manual steps you could not complete.
Upgrade existing
I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Summarize what changed and any follow-up checks I should run.
Trust & source
Release facts
- Source
- Tencent SkillHub
- Verification
- Indexed source record
- Version
- 1.0.1
Provenance
- Publisher
- florianbeer
- Source page
- View original listing
- Canonical URL
- Open canonical page
Documentation
Netatmo
Control Netatmo smart home devices via netatmo CLI.
Setup
Credentials in ~/.config/netatmo/: credentials.json: {"client_id": "...", "client_secret": "..."} tokens.json: OAuth tokens (auto-refreshed)
Commands
netatmo status # Full overview (thermostat + all sensors) netatmo thermostat # Thermostat details only netatmo weather # All sensors including Office netatmo history # 7-day temperature history with sparklines netatmo history --days 14 # Custom period netatmo set 21 # Set target temp (7-30°C, 3h manual mode) netatmo mode schedule # Resume schedule netatmo mode away # Away mode (12°C) netatmo mode hg # Frost guard (7°C) netatmo <cmd> --json # JSON output for any command
Available Data
LocationTempHumidityCO₂NoisePressureBatteryBedroom (main)✓✓✓✓✓—Outdoor✓✓——✓*✓Living Room✓✓✓——✓Office✓————— *Pressure displayed with Outdoor (sensor in main station)
Notes
CO₂ >1000 ppm = poor ventilation set uses manual mode for 3h, then reverts to schedule Tokens auto-refresh on expiry History shows ASCII sparklines for temperature trends
Category context
Messaging, meetings, inboxes, CRM, and teammate communication surfaces.
Source: Tencent SkillHub
Largest current source with strong distribution and engagement signals.
Package contents
Included in package
1 Docs
- SKILL.md