Requirements
- Target platform
- OpenClaw
- Install method
- Manual import
- Extraction
- Extract archive
- Prerequisites
- OpenClaw
- Primary doc
- SKILL.md
Tencent SkillHub · Developer Tools
S2G - General Purpose Workflow Engine
Connect to S2G (s2g.run) visual workflow automation platform over WebSocket. Execute workflow nodes as tools — password generators, hash functions, date math...
skill openclawclawhub Free
Connect to S2G (s2g.run) visual workflow automation platform over WebSocket. Execute workflow nodes as tools — password generators, hash functions, date math...
⬇ 0 downloads ★ 0 stars Unverified but indexed
Install for OpenClaw
Quick setup
- Download the package from Yavira.
- Extract the archive and review SKILL.md first.
- Import or place the package into your OpenClaw setup.
Package facts
- Download mode
- Yavira redirect
- Package format
- ZIP package
- Source platform
- Tencent SkillHub
- What's included
- README.md, SKILL.md, scripts/s2g-bridge.js, references/api.md, references/operations.md, references/protocol.md
Validation
- Use the Yavira download entry.
- Review SKILL.md after the package is downloaded.
- Confirm the extracted package contains the expected setup assets.
Install with your agent
Agent handoff
Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.
- Download the package from Yavira.
- Extract it into a folder your agent can access.
- Paste one of the prompts below and point your agent at the extracted folder.
New install
I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Then review README.md for any prerequisites, environment setup, or post-install checks. Tell me what you changed and call out any manual steps you could not complete.
Upgrade existing
I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Then review README.md for any prerequisites, environment setup, or post-install checks. Summarize what changed and any follow-up checks I should run.
Trust & source
Release facts
- Source
- Tencent SkillHub
- Verification
- Indexed source record
- Version
- 1.0.0
Provenance
- Publisher
- helmutsreinis
- Source page
- View original listing
- Canonical URL
- Open canonical page
Documentation
S2G Integration
OpenClaw is the orchestrator. S2G is the toolbox. Connect to an S2G workflow via WebSocket, auto-discover all nodes, and execute them as tools. OpenClaw ──WS──▶ S2G (wss://s2g.run/api/openclaw/ws/{nodeId}) ├── PasswordGenerator ├── HashGenerator ├── DateMath ├── SqlServer ├── Knowledge Base └── ... 200+ node types
The OpenClaw Node in S2G
The OpenClaw node is a built-in S2G node type (category: AI) that acts as a bidirectional bridge between OpenClaw agents and S2G workflows. It appears in the S2G node catalog as "OpenClaw Agent" and serves two roles: Bridge Endpoint — Provides a WebSocket endpoint (wss://s2g.run/api/openclaw/ws/{nodeId}) that OpenClaw agents connect to. Once connected, the agent can execute any sibling node in the workflow. Data Forwarder — Pushes upstream workflow data to connected OpenClaw agents via Input Forwarding. When the workflow triggers (e.g., from an HTTP webhook, scheduler, or another node), mapped fields are sent to all connected agents as {"type":"data","data":{...}}.
Setting Up the OpenClaw Node
Open the S2G designer at s2g.run Create or open a workflow Add an OpenClaw node from the AI category in the node palette Add tool nodes — any nodes you want the agent to access (e.g., PasswordGenerator, HashGenerator, DateMath, SqlServer, Knowledge Base) Connect the OpenClaw node to the tool nodes (the connection wiring tells S2G which nodes to expose) Configure the OpenClaw node (click to open properties): Auth Secret (optional) — If set, the bridge must send {"type":"auth","secret":"..."} as its first message Per-Request Timeout — Maximum time per individual node execution request Input Forwarding — Map upstream node outputs to push data to connected agents Manual Payload — Send ad-hoc JSON payloads to connected agents for testing Start the workflow (▶ button or API: POST https://s2g.run/api/v1/workflows/{id}/start) Copy the Node ID (UUID) from the node properties — this is needed for the bridge connection URL
Live View
The OpenClaw node properties panel includes a Live View that shows: Connected clients count Real-time execute/result message flow Data push events Connection/disconnection events
Prerequisites
S2G account at s2g.run (or self-hosted instance) A workflow with an OpenClaw node and tool nodes connected to it Workflow running — the WebSocket endpoint only accepts connections while the workflow is active Node.js with ws module: npm install ws
1. Install the bridge
# Copy bridge script to workspace cp scripts/s2g-bridge.js ~/.openclaw/workspace/s2g-bridge.js npm install ws
2. Get the OpenClaw node ID
In the S2G designer at s2g.run, click the OpenClaw node → copy the Node ID (UUID) from properties.
3. Start the bridge
# Connect to public S2G node s2g-bridge.js --s2g wss://s2g.run --node-id YOUR_NODE_UUID [--port 18792] [--secret SECRET] # Or with environment variables: S2G_WS_HOST=wss://s2g.run S2G_NODE_ID=abc-123 node s2g-bridge.js # Self-hosted S2G instance (development) node s2g-bridge.js --s2g ws://YOUR_HOST:5184 --node-id YOUR_NODE_UUID
4. Verify
curl http://localhost:18792/health # {"healthy":true,"uptime":42.5} curl http://localhost:18792/nodes # Lists all discovered nodes with names, types, and IDs
Bridge HTTP API
The bridge exposes a local HTTP API on port 18792 (configurable via --port): MethodEndpointDescriptionGET/health200 if connected to S2G, 503 if notGET/statusFull status: connection state, host, node list, stats, errorsGET/nodesList all available S2G nodes (name, type, ID)POST/executeExecute by nodeId: { nodeId, params }POST/execute/:nameExecute by name (fuzzy match): { params }POST/refreshRequest fresh node list from S2GPOST/reconnectForce disconnect and reconnect to S2G
By name (recommended)
curl -X POST http://localhost:18792/execute/PasswordGenerator \ -H "Content-Type: application/json" \ -d '{"params": {"length": "20", "mode": "strong"}}'
By node ID
curl -X POST http://localhost:18792/execute \ -H "Content-Type: application/json" \ -d '{"nodeId": "uuid-here", "params": {"length": "20"}}'
Response
{ "success": true, "output": { "Password": "xK9!mN...", "Strength": "Very Strong", "_TriggeredTags": "[\"success\"]" } }
Node Schema Discovery
Before using an unfamiliar node, check its exact parameter names via the S2G Catalog API: # Get schema for any node type curl -H "X-API-Key: $KEY" "https://s2g.run/api/v1/catalog/nodes/Custom_Base64/schema" # List all available node categories curl -H "X-API-Key: $KEY" "https://s2g.run/api/v1/catalog/categories" # List all nodes in a category curl -H "X-API-Key: $KEY" "https://s2g.run/api/v1/catalog/categories/AI/nodes" The fieldName in inputFields is the exact key to use in params. Case-sensitive.
Data Generation
PasswordGenerator — length, mode (strong/pronounceable/passphrase/PIN), count UuidGenerator — count, format HashGenerator — text, algorithm (md5/sha1/sha256) LoremIpsum — count, unit (paragraphs/sentences/words)
Data Operations
DateMath — operation (add/subtract/difference), date1, date2, days, hours... ExpressionEvaluator — expression, variables, precision CronParser — expression, count, fromDate TimezoneConverter — datetime, fromTimezone, toTimezone JsonPathQuery — json, path, returnFirst
Text & Encoding
Base64 — inputText, mode (encode/decode) UrlEncode — inputText, mode (encode/decode) CaseConverter — text, targetCase (camelCase/PascalCase/snake_case/kebab-case) MarkdownToHtml — markdown, addWrapper TextDiff — oldText, newText
Format Conversion
XmlToJson — xmlInput JsonToXml — jsonInput, rootElement CsvJson — inputText, mode (toJson/toCsv), delimiter JwtDecoder — token
AI Nodes
OpenAI — GPT models for text generation Anthropic — Claude models Gemini — Google AI models DeepSeek / DeepSeek Agent — DeepSeek models with agent capabilities Orchestrator — Multi-agent orchestration across AI providers
Knowledge Base
Knowledge — Graph-based knowledge store with 11 operations: Search, GetEntity, AddEntity, UpdateEntity, DeleteEntity, AddRelation, RemoveRelation, GetRelations, GetGraph, ListEntities, ListTypes
Vector Storage
VectorDb — Vector store for RAG: ingest documents, semantic search VectorClient — Query vector stores from workflows
Database
SqlServer — Execute SQL queries against SQL Server Postgresql — Execute PostgreSQL queries MongoDB — MongoDB document operations
Data Push (S2G → OpenClaw)
S2G can push data to connected OpenClaw agents in two ways: Input Forwarding — Configure in the OpenClaw node properties. Map upstream node output fields to keys that get forwarded to all connected agents. When the workflow triggers (e.g., webhook receives data → processes it → OpenClaw node forwards results), agents receive {"type":"data","data":{...}}. Manual Payload — In the OpenClaw node properties, use the Manual Payload editor to send ad-hoc JSON to all connected agents. Useful for testing and debugging.
Deployment & Operations
For running as a service (systemd/pm2), connection lifecycle, auto-reconnect behavior, monitoring, handling S2G/OpenClaw restarts, security, and multi-bridge setups: see references/operations.md. Key points: Bridge auto-reconnects on disconnect (5s delay) Bridge is stateless — just needs the WebSocket URL and node ID Sends keepalive pings every 30s to detect dead connections 409 = workflow not running — enable Auto-Start (🚀) in S2G or start via API: POST https://s2g.run/api/v1/workflows/{id}/start Logs to logs/s2g-bridge.log with 5MB rotation
S2G REST API
Full platform API at https://s2g.run/api/v1/ covering workflows, catalog, knowledge base, AI assistant, connections, usage, and logs: see references/api.md. Key capabilities: Workflows — Create, start/stop, add/remove nodes and connections: https://s2g.run/api/v1/workflows Catalog — Discover all 200+ node types and their schemas: https://s2g.run/api/v1/catalog/nodes Knowledge Base — Graph-based knowledge store with search, entities, and relations AI Assistant — Generate workflows from natural language: POST https://s2g.run/api/v1/ai/generate Connections — Manage OAuth/API key connections: https://s2g.run/api/v1/connections Usage & Logs — Monitor quotas and execution logs: https://s2g.run/api/v1/usage
WebSocket Protocol
For raw protocol details (message types, auth handshake, data push framing): see references/protocol.md. Connection URL: wss://s2g.run/api/openclaw/ws/{nodeId} Health check: GET https://s2g.run/api/openclaw/health
Tips
No manual wiring needed. All sibling nodes connected to the OpenClaw node are auto-discovered on connect. Param names are case-sensitive. Always verify with the catalog schema API. _TriggeredTags in output indicates which connection tag fired (success/error). 409 on connect means workflow isn't running. Start it at s2g.run or via API. Bridge auto-reconnects on disconnect with 5s delay — no manual intervention needed.
Category context
Code helpers, APIs, CLIs, browser automation, testing, and developer operations.
Source: Tencent SkillHub
Largest current source with strong distribution and engagement signals.
Package contents
Included in package
5 Docs1 Scripts
- SKILL.md
- README.md
- references/api.md
- references/operations.md
- references/protocol.md
- scripts/s2g-bridge.js