Requirements
- Target platform
- OpenClaw
- Install method
- Manual import
- Extraction
- Extract archive
- Prerequisites
- OpenClaw
- Primary doc
- SKILL.md
Tencent SkillHub · Communication & Collaboration
Telnyx Network
Private mesh networking and public IP exposure via Telnyx WireGuard infrastructure. Connect nodes securely or expose services to the internet.
skill openclawclawhub Free
Private mesh networking and public IP exposure via Telnyx WireGuard infrastructure. Connect nodes securely or expose services to the internet.
⬇ 0 downloads ★ 0 stars Unverified but indexed
Install for OpenClaw
Quick setup
- Download the package from Yavira.
- Extract the archive and review SKILL.md first.
- Import or place the package into your OpenClaw setup.
Package facts
- Download mode
- Yavira redirect
- Package format
- ZIP package
- Source platform
- Tencent SkillHub
- What's included
- SKILL.md, add-public-ip.sh, diagram.svg, discover.sh, expose.sh, join.sh
Validation
- Use the Yavira download entry.
- Review SKILL.md after the package is downloaded.
- Confirm the extracted package contains the expected setup assets.
Install with your agent
Agent handoff
Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.
- Download the package from Yavira.
- Extract it into a folder your agent can access.
- Paste one of the prompts below and point your agent at the extracted folder.
New install
I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Tell me what you changed and call out any manual steps you could not complete.
Upgrade existing
I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Summarize what changed and any follow-up checks I should run.
Trust & source
Release facts
- Source
- Tencent SkillHub
- Verification
- Indexed source record
- Version
- 1.0.0
Provenance
- Publisher
- teamtelnyx
- Source page
- View original listing
- Canonical URL
- Open canonical page
Documentation
Telnyx Network
Private mesh networking and public IP exposure via Telnyx WireGuard infrastructure.
Requirements
Telnyx API Key — Get one free WireGuard installed on your machine
Agent Use (OpenClaw)
WireGuard requires elevated permissions to create network interfaces. For OpenClaw to manage your mesh autonomously, run this once: sudo ./setup-sudoers.sh This adds a sudoers rule allowing WireGuard commands without password prompts. After setup, your agent can: # Agent can now do all of this without password prompts: ./setup.sh --region ashburn-va ./join.sh --name "my-node" --apply ./register.sh --name "my-node" ./teardown.sh What it does: Adds /etc/sudoers.d/wireguard-<username> Only allows wg and wg-quick commands (not blanket sudo) Can be removed anytime: sudo rm /etc/sudoers.d/wireguard-* Without this setup, the agent can still create networks and generate configs, but you'll need to manually run sudo wg-quick up <config> to connect.
Mesh Mode (Private)
Connect multiple machines in a private network. Like Tailscale, but on Telnyx infrastructure. ./setup.sh --region ashburn-va ./join.sh --name "laptop" ./join.sh --name "server" # run on server # Now laptop and server can talk via 172.27.0.x Cost: $10/month (WireGuard Gateway)
Expose Mode (Public)
Get a public IP and expose services to the internet. ./setup.sh --region ashburn-va ./join.sh --name "server" --apply ./add-public-ip.sh ./expose.sh 443 # Now https://64.16.x.x:443 reaches your server Cost: $60/month (WireGuard Gateway + Internet Gateway)
Commands
CommandDescriptionsudo ./setup-sudoers.shEnable passwordless sudo for WireGuard (one-time, for agent use)./setup.sh --region <code>Create network + WireGuard gateway./join.sh --name <name>Add this machine to the mesh./peers.shList all connected peers./add-public-ip.shAdd internet gateway (public IP)./expose.sh <port>Open a port./unexpose.sh <port>Close a port./status.shShow full status./teardown.shDelete everything./register.sh --name <name>Register node in mesh registry./discover.shDiscover other nodes on mesh./unregister.sh --name <name>Remove node from registry
Node Discovery
Nodes on the mesh can find each other using a registry stored in Telnyx Storage. This enables OpenClaw instances to automatically discover and communicate with each other.
Register This Node
After joining the mesh, register your node so others can find it: ./register.sh --name "home-server"
Discover Other Nodes
Find all registered nodes on the mesh: ./discover.sh # Output: # NAME IP HOSTNAME REGISTERED # home-server 172.27.0.1 macbook.local 2026-01-31 ✅ # work-laptop 172.27.0.2 thinkpad 2026-01-31 ✅ # JSON output for scripts ./discover.sh --json
Unregister
Remove a node from the registry: ./unregister.sh --name "old-server"
Use Case: Multi-OpenClaw Communication
# On OpenClaw A ./join.sh --name "openclaw-a" --apply ./register.sh --name "openclaw-a" # On OpenClaw B ./join.sh --name "openclaw-b" --apply ./register.sh --name "openclaw-b" # Either can now discover the other ./discover.sh # → Shows both openclaw-a and openclaw-b with their mesh IPs # Direct communication works via mesh IPs curl http://172.27.0.2:18789/health # OpenClaw B's gateway This completes the "host-to-local node sessions" and "direct comms between OpenClaws" use cases.
Regions
RegionCodeLocationUS Eastashburn-vaAshburn, VAUS Centralchicago-ilChicago, ILEUfrankfurt-deFrankfurt, DEEUamsterdam-nlAmsterdam, NL Get full list: ./setup.sh --region help
Blocked Ports (need --force)
22 (SSH) 23 (Telnet) 3306 (MySQL) 5432 (PostgreSQL) 6379 (Redis) 27017 (MongoDB)
Firewall
Only explicitly exposed ports accept traffic on the WireGuard interface. All other ports are blocked by default.
Configuration
All state is stored in config.json: { "network_id": "...", "region": "ashburn-va", "wireguard_gateway": { "id": "...", "endpoint": "64.16.x.x:5107", "subnet": "172.27.0.1/24" }, "internet_gateway": { "id": "...", "public_ip": "64.16.x.x" }, "peers": [...], "exposed_ports": [443, 80] }
1. Connect OpenClaw Instances
# On main server ./setup.sh --region ashburn-va ./join.sh --name "openclaw-main" --apply # On secondary server ./join.sh --name "openclaw-backup" --apply # Now they can communicate securely
2. Expose Webhook Endpoint
./add-public-ip.sh ./expose.sh 443 # Configure your webhook URL as https://64.16.x.x/webhook
3. Multi-Region Mesh
./setup.sh --region ashburn-va ./join.sh --name "us-east-server" # Same network, different region gateway ./setup.sh --region frankfurt-de --name same-network ./join.sh --name "eu-server"
Pricing
ComponentMonthly CostWireGuard Gateway$10Internet Gateway$50PeersFreeTrafficFree (beta)
"Gateway still provisioning"
Wait 5-10 minutes after setup for the gateway to be ready.
"Connection refused"
Check WireGuard is running: sudo wg show Check port is exposed: ./status.sh Check firewall: sudo iptables -L -n
"Permission denied"
WireGuard requires root. Run with sudo or use --apply flag.
License
MIT
Category context
Messaging, meetings, inboxes, CRM, and teammate communication surfaces.
Source: Tencent SkillHub
Largest current source with strong distribution and engagement signals.
Package contents
Included in package
4 Scripts1 Docs1 Files
- SKILL.md
- add-public-ip.sh
- discover.sh
- expose.sh
- join.sh
- diagram.svg