Requirements
- Target platform
- OpenClaw
- Install method
- Manual import
- Extraction
- Extract archive
- Prerequisites
- OpenClaw
- Primary doc
- SKILL.md
Tencent SkillHub Β· AI
Vincent - A secure wallet for your agent
Use this skill to safely create a wallet the agent can use for transfers, swaps, and any EVM chain transaction. Also supports raw signing and polymarket betting.
skill openclawclawhub Free
Use this skill to safely create a wallet the agent can use for transfers, swaps, and any EVM chain transaction. Also supports raw signing and polymarket betting.
β¬ 0 downloads β
0 stars Unverified but indexed
Install for OpenClaw
Quick setup
- Download the package from Yavira.
- Extract the archive and review SKILL.md first.
- Import or place the package into your OpenClaw setup.
Package facts
- Download mode
- Yavira redirect
- Package format
- ZIP package
- Source platform
- Tencent SkillHub
- What's included
- SKILL.md
Validation
- Use the Yavira download entry.
- Review SKILL.md after the package is downloaded.
- Confirm the extracted package contains the expected setup assets.
Install with your agent
Agent handoff
Hand the extracted package to your coding agent with a concrete install brief instead of figuring it out manually.
- Download the package from Yavira.
- Extract it into a folder your agent can access.
- Paste one of the prompts below and point your agent at the extracted folder.
New install
I downloaded a skill package from Yavira. Read SKILL.md from the extracted folder and install it by following the included instructions. Tell me what you changed and call out any manual steps you could not complete.
Upgrade existing
I downloaded an updated skill package from Yavira. Read SKILL.md from the extracted folder, compare it with my current installation, and upgrade it while preserving any custom configuration unless the package docs explicitly say otherwise. Summarize what changed and any follow-up checks I should run.
Trust & source
Release facts
- Source
- Tencent SkillHub
- Verification
- Indexed source record
- Version
- 1.0.0
Provenance
- Publisher
- piperwallet
- Source page
- View original listing
- Canonical URL
- Open canonical page
Documentation
Vincent - A wallet for agents
Use this skill to safely create a wallet the agent can use for transfers, swaps, and any EVM chain transaction without ever exposing private keys to the agent. Create a wallet, set spending policies, and your agent can transfer tokens, do swaps, and interact with smart contracts within the boundaries you define. The agent never sees the private key. All transactions are executed server-side through a smart account. The wallet owner controls what the agent can do via configurable policies.
Which Wallet Type to Use
TypeUse CaseNetworkGasEVM_WALLETTransfers, swaps, DeFi, contract callsAny EVM chainSponsored (free)RAW_SIGNERRaw message signing for special protocolsAny (Ethereum + Solana)You payPOLYMARKET_WALLETPrediction market tradingPolygon onlySponsored (free) Choose EVM_WALLET (default) for: Sending ETH or tokens Swapping tokens on DEXs Interacting with smart contracts Any standard EVM transaction Choose RAW_SIGNER only when you need: Raw ECDSA/Ed25519 signatures for protocols that don't work with smart accounts To sign transaction hashes you'll broadcast yourself Solana signatures Choose POLYMARKET_WALLET only for: Betting on Polymarket prediction markets Requires USDC.e on Polygon for funding
Configuration
All API requests require a Bearer token (the API key returned when creating a wallet). If you're an openclaw instance, store and retrieve it from ~/.openclaw/credentials/agentwallet/<API_KEY_ID>.json. Otherwise, you can store it in your current working directory at agentwallet/<API_KEY_ID>.json. Authorization: Bearer <API_KEY>
1. Create a Wallet
Create a new smart account wallet for your agent. This generates a private key server-side (you never see it), creates a ZeroDev smart account, and returns an API key for the agent plus a claim URL for the wallet owner. curl -X POST "https://heyvincent.ai/api/secrets" \ -H "Content-Type: application/json" \ -d '{ "type": "EVM_WALLET", "memo": "My agent wallet", "chainId": 84532 }' Response includes: apiKey -- store this securely; use it as the Bearer token for all future requests claimUrl -- share this with the user so they can claim the wallet and set policies address -- the smart account address After creating, tell the user: "Here is your wallet claim URL: <claimUrl>. Use this to claim ownership, set spending policies, and monitor your agent's wallet activity."
2. Get Wallet Address
curl -X GET "https://heyvincent.ai/api/skills/evm-wallet/address" \ -H "Authorization: Bearer <API_KEY>"
3. Check Balances
# Get all token balances across all supported chains (ETH, WETH, USDC, etc.) curl -X GET "https://heyvincent.ai/api/skills/evm-wallet/balances" \ -H "Authorization: Bearer <API_KEY>" # Filter to specific chains (comma-separated chain IDs) curl -X GET "https://heyvincent.ai/api/skills/evm-wallet/balances?chainIds=1,137,42161" \ -H "Authorization: Bearer <API_KEY>" Returns all ERC-20 tokens and native balances with symbols, decimals, logos, and USD values.
4. Transfer ETH or Tokens
# Transfer native ETH curl -X POST "https://heyvincent.ai/api/skills/evm-wallet/transfer" \ -H "Authorization: Bearer <API_KEY>" \ -H "Content-Type: application/json" \ -d '{ "to": "0xRecipientAddress", "amount": "0.01" }' # Transfer ERC-20 token curl -X POST "https://heyvincent.ai/api/skills/evm-wallet/transfer" \ -H "Authorization: Bearer <API_KEY>" \ -H "Content-Type: application/json" \ -d '{ "to": "0xRecipientAddress", "amount": "100", "token": "0xTokenContractAddress" }'
5. Swap Tokens
Swap one token for another using DEX liquidity (powered by 0x). # Preview a swap (no execution, just pricing) curl -X POST "https://heyvincent.ai/api/skills/evm-wallet/swap/preview" \ -H "Authorization: Bearer <API_KEY>" \ -H "Content-Type: application/json" \ -d '{ "sellToken": "0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE", "buyToken": "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48", "sellAmount": "0.1", "chainId": 1 }' # Execute a swap curl -X POST "https://heyvincent.ai/api/skills/evm-wallet/swap/execute" \ -H "Authorization: Bearer <API_KEY>" \ -H "Content-Type: application/json" \ -d '{ "sellToken": "0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE", "buyToken": "0xA0b86991c6218b36c1d19D4a2e9Eb0cE3606eB48", "sellAmount": "0.1", "chainId": 1, "slippageBps": 100 }' sellToken / buyToken: Token contract addresses. Use 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE for native ETH. sellAmount: Human-readable amount to sell (e.g. "0.1" for 0.1 ETH). chainId: The chain to swap on (1 = Ethereum, 137 = Polygon, 42161 = Arbitrum, 10 = Optimism, 8453 = Base, etc.). slippageBps: Optional slippage tolerance in basis points (100 = 1%). Defaults to 100. The preview endpoint returns expected buy amount, route info, and fees without executing. The execute endpoint performs the actual swap through the smart account, handling ERC20 approvals automatically.
6. Send Arbitrary Transaction
Interact with any smart contract by sending custom calldata. curl -X POST "https://heyvincent.ai/api/skills/evm-wallet/send-transaction" \ -H "Authorization: Bearer <API_KEY>" \ -H "Content-Type: application/json" \ -d '{ "to": "0xContractAddress", "data": "0xCalldata", "value": "0" }'
Policies
The wallet owner controls what the agent can do by setting policies via the claim URL. If a transaction violates a policy, the API will reject it or require human approval via Telegram. PolicyWhat it doesAddress allowlistOnly allow transfers/calls to specific addressesToken allowlistOnly allow transfers of specific ERC-20 tokensFunction allowlistOnly allow calling specific contract functions (by 4-byte selector)Spending limit (per tx)Max USD value per transactionSpending limit (daily)Max USD value per rolling 24 hoursSpending limit (weekly)Max USD value per rolling 7 daysRequire approvalEvery transaction needs human approval via TelegramApproval thresholdTransactions above a USD amount need human approval If no policies are set, all actions are allowed by default. Once the owner claims the wallet and adds policies, the agent operates within those boundaries.
Re-linking (Recovering API Access)
If the agent loses its API key, the wallet owner can generate a re-link token from the frontend. The agent then exchanges this token for a new API key. How it works: The user generates a re-link token from the wallet detail page in the frontend The user gives the token to the agent (e.g. by pasting it in chat) The agent calls the re-link endpoint to exchange the token for a new API key curl -X POST "https://heyvincent.ai/api/secrets/relink" \ -H "Content-Type: application/json" \ -d '{ "relinkToken": "<TOKEN_FROM_USER>", "apiKeyName": "Re-linked API Key" }' Response includes: secret -- the wallet metadata (id, type, address, chainId, etc.) apiKey.key -- the new API key to use as Bearer token for all future requests Important: Re-link tokens are one-time use and expire after 10 minutes. No authentication is required on this endpoint -- the token itself is the authorization. If a user tells you they have a re-link token, use this endpoint to regain access to the wallet. Store the returned API key and use it for all subsequent requests.
Important Notes
No gas needed. A paymaster is fully set up -- all transaction gas fees are sponsored automatically. The wallet does not need ETH for gas. Never try to access raw secret values. The private key stays server-side -- that's the whole point. Always store the API key from wallet creation. If you're an openclaw instance, store it in ~/.openclaw/credentials/agentwallet/<API_KEY_ID>.json. Otherwise, you can store it in your current working directory at agentwallet/<API_KEY_ID>.json. Always search for the API keys in the credentials folder before using the API. If you're an openclaw instance, search for the API key in ~/.openclaw/credentials/agentwallet/<API_KEY_ID>.json. Otherwise, you can search for the API key in your current working directory at agentwallet/<API_KEY_ID>.json. Always share the claim URL with the user after creating a wallet. If a transaction is rejected, it may be blocked by a policy. Tell the user to check their policy settings via the frontend at https://heyvincent.ai. If a transaction requires approval, it will return status: "pending_approval". The wallet owner will receive a Telegram notification to approve or deny.
Raw Signer (Advanced)
For raw ECDSA/Ed25519 signing when smart accounts won't work.
Create a Raw Signer
curl -X POST "https://heyvincent.ai/api/secrets" \ -H "Content-Type: application/json" \ -d '{ "type": "RAW_SIGNER", "memo": "My raw signer" }' Response includes both Ethereum (secp256k1) and Solana (ed25519) addresses derived from the same seed.
Get Addresses
curl -X GET "https://heyvincent.ai/api/skills/raw-signer/addresses" \ -H "Authorization: Bearer <API_KEY>" Returns ethAddress and solanaAddress.
Sign a Message
curl -X POST "https://heyvincent.ai/api/skills/raw-signer/sign" \ -H "Authorization: Bearer <API_KEY>" \ -H "Content-Type: application/json" \ -d '{ "message": "0x<hex-encoded-bytes>", "curve": "ethereum" }' message: Hex-encoded bytes to sign (must start with 0x) curve: "ethereum" for secp256k1 ECDSA, "solana" for ed25519 Returns a hex-encoded signature. For Ethereum, this is r || s || v (65 bytes). For Solana, it's a 64-byte ed25519 signature.
Polymarket Prediction Markets
Polymarket wallets use Gnosis Safe wallets on Polygon with gasless trading through Polymarket's relayer.
Create a Polymarket Wallet
curl -X POST "https://heyvincent.ai/api/secrets" \ -H "Content-Type: application/json" \ -d '{ "type": "POLYMARKET_WALLET", "memo": "My prediction market wallet" }' Response includes: apiKey -- use as Bearer token for all Polymarket requests claimUrl -- share with the user to claim ownership and set policies walletAddress -- the EOA address (Safe is deployed lazily on first use) Important: After creation, the wallet has no funds. The user must send USDC.e (bridged USDC) on Polygon to the Safe address before placing bets.
Get Balance
curl -X GET "https://heyvincent.ai/api/skills/polymarket/balance" \ -H "Authorization: Bearer <API_KEY>" Returns: walletAddress -- the Safe address (deployed on first call if needed) collateral.balance -- USDC.e balance available for trading collateral.allowance -- approved amount for Polymarket contracts Note: The first balance call triggers Safe deployment and collateral approval (gasless via relayer). This may take 30-60 seconds.
Fund the Wallet
Before placing bets, the user must send USDC.e to the Safe address: Get the wallet address from /balance endpoint Send USDC.e (bridged USDC, contract 0x2791Bca1f2de4661ED88A30C99A7a9449Aa84174) on Polygon to that address Minimum $1 required per bet (Polymarket minimum) Do not send native USDC (0x3c499c542cEF5E3811e1192ce70d8cC03d5c3359). Polymarket only accepts bridged USDC.e.
Browse & Search Markets
# Search markets by keyword (recommended) curl -X GET "https://heyvincent.ai/api/skills/polymarket/markets?query=bitcoin&limit=20" \ -H "Authorization: Bearer <API_KEY>" # Get all active markets (paginated) curl -X GET "https://heyvincent.ai/api/skills/polymarket/markets?active=true&limit=50" \ -H "Authorization: Bearer <API_KEY>" # Get specific market by condition ID curl -X GET "https://heyvincent.ai/api/skills/polymarket/market/<CONDITION_ID>" \ -H "Authorization: Bearer <API_KEY>" Market response includes: question: The market question outcomes: Array like ["Yes", "No"] or ["Team A", "Team B"] outcomePrices: Current prices for each outcome tokenIds: Array of token IDs for each outcome - use these for placing bets acceptingOrders: Whether the market is open for trading closed: Whether the market has resolved Important: Always use the tokenIds array from the market response. Each outcome has a corresponding token ID at the same index. For a "Yes/No" market: tokenIds[0] = "Yes" token ID tokenIds[1] = "No" token ID
Get Order Book
curl -X GET "https://heyvincent.ai/api/skills/polymarket/orderbook/<TOKEN_ID>" \ -H "Authorization: Bearer <API_KEY>" Returns bids and asks with prices and sizes. Use this to determine current market prices before placing orders.
Place a Bet
curl -X POST "https://heyvincent.ai/api/skills/polymarket/bet" \ -H "Authorization: Bearer <API_KEY>" \ -H "Content-Type: application/json" \ -d '{ "tokenId": "<OUTCOME_TOKEN_ID>", "side": "BUY", "amount": 5, "price": 0.55 }' Parameters: tokenId: The outcome token ID (from market data or order book) side: "BUY" or "SELL" amount: For BUY orders, USD amount to spend. For SELL orders, number of shares to sell. price: Limit price (0.01 to 0.99). Optional -- omit for market order. BUY orders: amount is the USD you want to spend (e.g., 5 = $5) You'll receive amount / price shares (e.g., $5 at 0.50 = 10 shares) Minimum order is $1 SELL orders: amount is the number of shares to sell You'll receive amount * price USD Must own the shares first (from a previous BUY) Important timing: After a BUY fills, wait a few seconds before selling. Shares need time to settle on-chain.
View Positions & Orders
# Get open orders curl -X GET "https://heyvincent.ai/api/skills/polymarket/positions" \ -H "Authorization: Bearer <API_KEY>" # Get trade history curl -X GET "https://heyvincent.ai/api/skills/polymarket/trades" \ -H "Authorization: Bearer <API_KEY>"
Cancel Orders
# Cancel specific order curl -X DELETE "https://heyvincent.ai/api/skills/polymarket/orders/<ORDER_ID>" \ -H "Authorization: Bearer <API_KEY>" # Cancel all open orders curl -X DELETE "https://heyvincent.ai/api/skills/polymarket/orders" \ -H "Authorization: Bearer <API_KEY>"
Polymarket Workflow Example
Create wallet: POST /api/secrets {"type": "POLYMARKET_WALLET", "memo": "Betting wallet"} Get Safe address (triggers deployment): GET /api/skills/polymarket/balance # Returns walletAddress -- give this to user to fund User sends USDC.e to the Safe address on Polygon Search for a market: # Search by keyword - returns only active, tradeable markets GET /api/skills/polymarket/markets?query=bitcoin&active=true Response example: { "markets": [ { "question": "Will Bitcoin hit $100k by end of 2025?", "outcomes": ["Yes", "No"], "outcomePrices": ["0.65", "0.35"], "tokenIds": ["123456...", "789012..."], "acceptingOrders": true } ] } Check order book for the outcome you want: # Use the tokenId from the market response GET /api/skills/polymarket/orderbook/123456... # Note the bid/ask prices Place BUY bet using the correct token ID: # tokenId must be from the tokenIds array, NOT the conditionId POST /api/skills/polymarket/bet {"tokenId": "123456...", "side": "BUY", "amount": 5, "price": 0.55} Wait for settlement (a few seconds) Sell position: POST /api/skills/polymarket/bet {"tokenId": "123456...", "side": "SELL", "amount": 9.09, "price": 0.54} Common Errors: "No orderbook exists for the requested token id" - The market is closed or you're using the wrong ID. Make sure: The market has acceptingOrders: true You're using a tokenId from the tokenIds array, not the conditionId The market hasn't already resolved
Category context
Agent frameworks, memory systems, reasoning layers, and model-native orchestration.
Source: Tencent SkillHub
Largest current source with strong distribution and engagement signals.
Package contents
Included in package
1 Docs
- SKILL.md